Stippling
Technique
The
stippling technique adds dimension,
complementing your furnishings
rather than competing with
them for attention. This technique
is ideal for dining rooms,
bedrooms or as an accent above
or below a chair rail.
Subtractive
stippling is easy to master.
Apply McCloskey Special Effects
Translucent Color, Opal or
Pearl Glaze with a brush or
roller over the dry Base Coat.
While the glaze is wet, lightly
pounce a clean, dry stippling
Brush on the surface, slowly
removing the glaze. Be sure
to practice this technique
before you begin.
Subtractive
stippling is a technique that
works best with a partner…
one person can apply the glaze
while the other follows behind
with the Stippling Brush.
Step
One:
Before starting, mask off
woodwork and ceiling. Apply
Base Coat. Remove tape if
you are not completing your
project the same day. Allow
to dry.
Step
Two:
Reapply tape. Using a premium
quality roller with 3/8"
nap, apply a thin, even coat
of Special Effects Translucent
Color, Opal or Pearl Glaze
in random sections resembling
a jigsaw puzzle. Be sure to
maintain a 6" wet edge.
Step
Three:
Pounce the Stippling Brush
on the wet glaze with a quick,
light motion. This will remove
small spots of glaze. Change
directions frequently for
a delicate, even finish. Remove
excess glaze from the brush
often to ensure that you are
removing glaze.
Professional
Tip: Use a Color Washing Brush
instead of the Stippling Brush
in corners and tight spaces.
|
